Home Assistant Core 2026.5.0 → 2026.6.0

Purpose-specific triggers (Labs)

The behavior options for the Labs purpose-specific triggers have been renamed to better match what they do: any is now each, and last is now all. The default is now each.

If you have automations that use these triggers from the Labs preview at Settings > System > Labs, open them in the automation editor and re-pick the behavior option. Any YAML you wrote against the old keys needs to be updated to the new names.

(@emontnemery - #172348)

Bluetooth

The default Bluetooth scanning mode has changed to Auto, which dynamically switches between active and passive scanning depending on what is happening. This saves around 95-96% of the battery used for Bluetooth scanning while keeping the same functionality for most setups.

If you run into issues after the upgrade, you can switch your Bluetooth adapter back to Active scanning. Go to Settings > Devices & services, open the Bluetooth integration, and select Configure on your adapter to change the scanning mode.

(@bdraco - #171985) (Bluetooth documentation)

Certificate Expiry

The error attribute on the certificate expiry sensor now returns a proper None value instead of the string "None" when there is no error.

If you use this attribute in templates, update your comparisons from == "None" to is none.

(@TomFilsell - #170878) (Certificate Expiry documentation)

ESPHome

The default Bluetooth proxy scanning mode for ESPHome devices is now Auto. Devices that were previously set to Active are automatically migrated to Auto, while devices set to Passive keep their setting.

If you need Active scanning for a specific device, change it back in the device options under Settings > Devices & services.

(@bdraco - #171996) (ESPHome documentation)

HDMI-CEC

Calling the turn_off action on HDMI-CEC switch or media player entities now sends the standard CEC standby command instead of a vendor-specific power-off command. This works more reliably across devices from different manufacturers.

If you relied on the previous behavior, you can send the original command using the hdmi_cec.send_command action with keypress 0x44 followed by 0x6c.

(@pattyland - #170206) (HDMI-CEC documentation)

IronOS

The uptime sensor for IronOS soldering irons has changed from a duration sensor (reporting seconds) to a timestamp sensor that reports when the device was started.

Update any automations or dashboards that read this sensor to work with the new timestamp format.

(@tr4nt0r - #169699) (IronOS documentation)

ONVIF

When you call the onvif.ptz action with continuous_duration: 0, the integration no longer sends a Stop command after the ContinuousMove. This lets you start a continuous movement and stop it later with a separate call.

If your automations rely on the camera stopping automatically, set continuous_duration to the desired duration in seconds.

(@yoxcu - #163173) (ONVIF documentation)

Shelly

Shelly devices used as Bluetooth scanners now support the new Auto scanning mode. Existing devices set to Active are automatically migrated to Auto for better battery and performance.

You can change the scanning mode back in the device options under Settings > Devices & services.

(@bdraco - #172008) (Shelly documentation)

SmartThings

The source attribute on SmartThings media players is now normalized to standard Home Assistant values. For example, D.IN is now reported as digital_input and BT as bluetooth.

If you use the source attribute in automations, dashboards, or templates, update them to match the new values.

(@felipecrs - #160034) (SmartThings documentation)

Template entities

The legacy template platform syntax under the individual platform keys has been removed. This syntax was deprecated in Home Assistant 2025.12 and has now reached the end of its 6-month deprecation period.

This affects the following platforms:

• alarm_control_panel
• binary_sensor
• cover
• fan
• light
• lock
• sensor
• switch
• vacuum
• weather

Move your template entities to the modern template: syntax. A step-by-step migration guide is available in the Removal of legacy template entities forum thread.

(@Petro31 - #169608, #169610, #169611, #169613, #169615, #169725, #169728, #169730, #169732, #169734) (Template documentation)

Tuya

The unit of measurement provided by the Tuya API now takes precedence over the default unit assigned by Home Assistant. This makes the reported value match what the Tuya app shows.

If your device reports an invalid or unexpected unit, please submit a bug report with the device details and the unit it reports and adjust it accordingly.

(@epenet - #170338) (Tuya documentation)

Velux

The deprecated velux.reboot_gateway action has been removed. Use the reboot button entity on your Velux gateway instead.

(@wollew - #169796) (Velux documentation)